ABC classification
Improving the performance of planning and controlling raw material inventory in food industry [Volume 10, Issue 4, 2021, Pages 332-345]
Abel integral equations
CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]
Accelerated Life Testing
Application of accelerated life testing in human reliability analysis [Volume 10, Issue 4, 2021, Pages 346-357]
Accounting actions
Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [Volume 10, Issue 3, 2021, Pages 206-222]
Additive Manufacturing
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Additive Manufacturing
Fabrication and process parameter optimization of a 3d printer using response surface methodology [Volume 10, Issue 3, 2021, Pages 238-250]
Adsorption
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
Aerial Industries
Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]
Agent-based modeling
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Aggregate Production Planning
An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]
Aghezzaf’s method
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
AHP
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
AHP
An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]
AHP
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
AHP
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Aircraft Scheduling Problem
A mathematical model for robust landing and take-off scheduling at an airport considering runway disturbances [Volume 12, Issue 1, 2023, Pages 21-42]
Airport
Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]
Air V-bending
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
Aluminum 1050 A
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
Alzheimer’s disease
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Amplified Black Hole
Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]
Analytical Hierarchy Process
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
Analytical network process
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Analytic Hierarchy Process
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Analytic Hierarchy Process
Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]
Analytic Hierarchy Process
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Analytic Hierarchy Process
Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]
Analytic Hierarchy Process (AHP)
Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]
Analytic Network Process
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Anthropometry
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
Anthropometry
Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]
Aras
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
Artificial Neural Networks
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
Association rules
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
AUN-QA
Supply chain management information system model for quality assurance in educational management for ASEAN University network quality assurance (AUN-QA) [Volume 10, Issue 4, 2021, Pages 307-317]
Average Run Length (ALR)
Designing the multivariate nonconforming proportion control charts considering the measurement error [Volume 10, Issue 4, 2021, Pages 295-306]
Aviation industry
The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]
B
Balanced Scorecard
A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]
Bangladesh
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
Bangladesh
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Banking Industries
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Bayesian
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Bi-level programming
An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]
Bi-objective Optimization
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
Biomedical implants
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Blockchain
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
B-metric-like space
Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]
B-Metric-Like Space (BMLS)
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
B-mine algorithm
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Branch and bound
Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]
Brand
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Business Cycle
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Business Process
Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]
C
CA
The Optimization Model for Allocating Reward to Employees using GAHP and Cluster Analysis [(Articles in Press)]
Calibration
Solving Monetary (MIU) models with Linearized Euler Equations: Method of Undetermined Coefficients [Volume 6, Issue 2, 2017, Pages 172-183]
Capability process index
A Genetic Algorithm for Curve Fitting by Spline Regression [Volume 11, Issue 4, 2022, Pages 399-410]
Capacity
Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]
Capillary Marketing
Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]
Carpet
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
CAS wavelet
CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]
Cause and effect diagram
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]
Cayley graph
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
CCD
Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]
Change point
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Churn prediction
A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]
Circular Economy
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
Cloud manufacturing
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
C-multiplier
Influence of missmatch-induced stress and porosity of materials on technological process [Volume 11, Issue 2, 2022, Pages 92-118]
CNC PCB Plotter
Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]
CO2 emission
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
COCO
Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]
Coincident Indicators
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Coinfection
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
Combined Loss Function
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
Combined QFDVA
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Common set of weights
Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]
Company efficiency
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Competitiveness
Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]
Complex system
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
Composite Leading Indicator
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Composites
Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]
Compressive and tensile strength of concrete
Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]
Computer Algorithms
Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]
Conditional value at risk
Competition in Supply Chain Network: Retailers’ Risk Averseness Approach [Volume 6, Issue 2, 2017, Pages 121-128]
Confirmatory Factor Analysis
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method [Volume 13, Issue 1, 2024, Pages 25-47]
Congestion
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Congruent
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Consignment Stock
A proportionately increased small and equal batch delivery under consignment stock agreement for a single vendor, multiple buyers supply chain system [Volume 12, Issue 4, 2023, Pages 414-430]
Constrained project scheduling
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Constraint satisfaction model
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Construction projects
Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]
Construction site layout planning
A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]
Content Marketing
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Contour
Improvement in video inpainting in presence of moving subjects [Volume 8, Issue 4, 2019, Pages 325-338]
Contour plot
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Contract
Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]
COP
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
COPRAS
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
COPRAS
Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]
Copy centre
Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]
Coronavirus
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Corrosive properties
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
Cost
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
Cost analysis
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Covid-19 economic impact
Evaluation of household expenditure in the united states: pre-covid and post-covid statistical analysis [Volume 12, Issue 4, 2023, Pages 388-396]
Critical Success Factors (CSF)
Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]
CRM activities
Customer Involvement in Innovation Process Based on Open Innovation Concepts [Volume 1, Issue 2, 2012, Pages 1-9]
Cross-efficiency evaluation
A neutral DEA model for cross-efficiency evaluation [Volume 11, Issue 4, 2022, Pages 411-422]
Crude oils
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
Cryptocurrency
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Cuckoo Algorithm
Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]
Cuckoo Optimization Algorithm (COA)
The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-constraint [Volume 10, Issue 3, 2021, Pages 223-237]
Cultural algorithm
Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]
Customer Lifetime Value
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
Customer Lifetime Value (CLV)
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Customer Order Decoupling Point
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Customer-oriented product
Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]
Customer Participation
Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]
Customer Profile
Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]
Customer Relationship Management
Study the Impact of Customer's Profile and Participation on the Performance of Customer Relationship Management in Service Organizations [Volume 1, Issue 1, 2012, Pages 29-41]
Customer Relationship Management
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
Customer Relationship Management (CRM)
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Customer’ s satisfaction
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
CUSUM charts
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Cycle Time
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Cycle Time
Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]
D
Data-driven Theory
Developing a content marketing model with goal to improve brand of countrywide the banking industriestitle [Volume 11, Issue 1, 2022, Pages 50-61]
Data Envelopment Analysis
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
Data Envelopment Analysis
Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]
Data Envelopment Analysis
Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]
Data Envelopment Analysis
Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]
Data Envelopment Analysis
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Data Envelopment Analysis
Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]
Data Envelopment Analysis
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Data Envelopment Analysis
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Data Envelopment Analysis
Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]
Data Envelopment Analysis
Assess the efficiency and effectiveness simultaneously in a three-stage process, by using a unified model [Volume 4, 1(4), 2015, Pages 15-23]
Data Envelopment Analysis
The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]
Data Envelopment Analysis
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
Data Envelopment Analysis
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
Data Envelopment Analysis
Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]
Data Envelopment Analysis
The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]
Data Envelopment Analysis
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Data Envelopment Analysis
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Data Envelopment Analysis
A neutral DEA model for cross-efficiency evaluation [Volume 11, Issue 4, 2022, Pages 411-422]
Data Envelopment Analysis
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Data Envelopment Analysis (DEA)
A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]
Data mining
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
Data mining
A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]
Data mining
PyIT-MLFS: a Python-based information theoretical multi-label feature selection library [Volume 11, Issue 1, 2022, Pages 9-15]
Data mining
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Data mining
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
DEA
Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]
DEA
A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]
DEA
Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]
Decay
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
Decision-making
Optimizing Supermarket Supply Chain using fuzzy AHP: A Study on Save 'n' Safe in Bangladesh [Volume 8, Issue 3, 2019, Pages 225-242]
Decision Making
Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]
Decision Making
A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]
Decision Making Unit
The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]
Decision making unit (DMU)
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
Decision-making Units
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Decision Making Units
Deriving Priorities the Alternatives in an Analytic Hierarchy Process [Volume 3, Issue 4, 2014, Pages 13-20]
Decision Tree Classifier
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Deep Neural Networks (DNN)
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Delay reduction
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
Delivery Option Public - Private Partnership
Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]
Delivery Time
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
Delphi method
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Delphi method
Designing a hybrid model for the green supply chain in Gilan Steel Industry [Volume 12, Issue 1, 2023, Pages 73-87]
Demand rate
A proportionately increased small and equal batch delivery under consignment stock agreement for a single vendor, multiple buyers supply chain system [Volume 12, Issue 4, 2023, Pages 414-430]
Demand satisfaction
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
DEMATEL method
The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]
Design for functionality
Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]
Design for Reconfigurability
Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]
Design for X
Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]
Difference divisor graph
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
Discrete electromagnetism-like algorithm
A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]
Disruption Mitigation
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Distribution
An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]
Distribution Enabler
A Fuzzy BWM Approach to Prioritize Distribution Network Enablers [Volume 11, Issue 4, 2022, Pages 349-365]
Distribution network
A Fuzzy BWM Approach to Prioritize Distribution Network Enablers [Volume 11, Issue 4, 2022, Pages 349-365]
Distribution policy
A proportionately increased small and equal batch delivery under consignment stock agreement for a single vendor, multiple buyers supply chain system [Volume 12, Issue 4, 2023, Pages 414-430]
Divisor graph
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
DMAIC
Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]
DMAIC Methodology
Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]
DMU
Performance Evaluation Function for Benchmarking Process Using Context-Dependent Data Envelopment Analysis [Volume 1, Issue 1, 2012, Pages 19-28]
D-number Theory
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Domestic Air Passenger Demand
Trend extrapolation of domestic air travel demand in Nigeria (2018-2030) [Volume 7, Issue 4, 2018, Pages 468-481]
DSA Method
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
DSGE Model
Solving Monetary (MIU) models with Linearized Euler Equations: Method of Undetermined Coefficients [Volume 6, Issue 2, 2017, Pages 172-183]
Due Date
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Duplicate genetic algorithm
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
E
Economic Growth
The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]
Economic Justification
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Economic lot size
A proportionately increased small and equal batch delivery under consignment stock agreement for a single vendor, multiple buyers supply chain system [Volume 12, Issue 4, 2023, Pages 414-430]
Education
New Course in Industrial Engineering Education Curriculum [Volume 12, Issue 1, 2023, Pages 1-6]
Educational management in supply chain
Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]
Effective Factors
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Effects analysis
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Efficiency
Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]
Efficiency
Determine the Efficiency of Time Depended Units by Using Data Envelopment Analysis [Volume 6, Issue 3, 2017, Pages 193-201]
Efficiency
Assess the efficiency and effectiveness simultaneously in a three-stage process, by using a unified model [Volume 4, 1(4), 2015, Pages 15-23]
Efficiency
The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]
Efficiency
Concessioning a Strategy for Enhancing Nigeria’s Airport Operational Efficiency - Lessons from Developed Countries [Volume 6, Issue 3, 2017, Pages 228-245]
Efficiency
Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]
Efficiency
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Efficiency index
Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]
Efficiency score
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
EFQM
A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]
Electroflotation
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
Emergency
Optimization of Emergency Management System in a Construction Organization in India [Volume 1, Issue 3, 2012, Pages 26-38]
Emission-constraint model
Carbon Based Closed-Loop Supply Chain Design under Uncertainty using an Interval-Valued Fuzzy Stochastic Programming Approach [Volume 3, Issue 3, 2014, Pages 24-48]
Employees
The Optimization Model for Allocating Reward to Employees using GAHP and Cluster Analysis [(Articles in Press)]
Employees-Organization
Identifying and prioritizing the factors affecting accounting action with the ANP and Dimatel [Volume 10, Issue 3, 2021, Pages 206-222]
Energy Economics
Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]
Enterprise Resource Planning selection
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Entrepreneurial team
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Environmental effects
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Environment related factors
Integrated model of critical success factors of construction projects: A case of Esfahan [Volume 7, Issue 3, 2018, Pages 381-395]
EPR
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
Equipment Selection
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Ergonomics
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
Ergonomics
Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]
Error
Application of accelerated life testing in human reliability analysis [Volume 10, Issue 4, 2021, Pages 346-357]
Error analysis
CAS Wavelet Function Method for Solving Abel Equations with Error Analysis [Volume 6, Issue 4, 2017, Pages 350-364]
Evaluation Criteria
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
Exact Algorithm
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Excel Solver
Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]
Excel Solver
Productivity Improvement through Ergonomics Sub-system Concern Using MCDM with Goal Programing: A Case Study [Volume 11, Issue 4, 2022, Pages 378-389]
Excel VBA
Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]
Exchange rate
The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]
Execution system
Qualitative Evaluation and Selecting the Optimum Public Private Partnership System for Transportation [Volume 2, Issue 2, 2013, Pages 61-69]
Exergy efficiency
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
Extended Topsis
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Face Detection
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
Face recognition
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Facial Recognition
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
Facility Layout Problem(FLP)
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
Facility location
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Facility location
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
Facility location
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Facility location-allocation
Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]
FAHP
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
FAHP
A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]
Failure mode and effect analysis (FMEA)
Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]
Faster-RCNN
Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]
Fault Tree Analysis (FTA)
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
FDM
Fabrication and process parameter optimization of a 3d printer using response surface methodology [Volume 10, Issue 3, 2021, Pages 238-250]
Feasibility
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Feasibility study
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
Feasible Answer
Using a new algorithm to improve the search answer in quadratic assignment problem (QAP) [Volume 10, Issue 2, 2021, Pages 165-173]
Feature Learning
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
Feature selection
A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]
Feature selection
PyIT-MLFS: a Python-based information theoretical multi-label feature selection library [Volume 11, Issue 1, 2022, Pages 9-15]
Feature selection
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Ferrous metals
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
FIFO
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Finite commutative ring
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Fixed Point Theorem
Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]
Fixed Point Theorem (FPT)
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
Flanged Diffusers
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Flexible job shop scheduling problem
Duplicate Genetic Algorithm for Scheduling a Bi-Objective Flexible Job Shop Problem [Volume 1, Issue 2, 2012, Pages 10-26]
Flexible manufacturing systems
Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]
Flexsim
Productivity optimization in the electronics Industry Using Simulation-based Modeling Approach [(Articles in Press)]
Flooring
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
Flow shop
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Flow shop scheduling problem
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Food Supply Chain
COVID-19 and food supply chain disruptions in Bangladesh: impacts and strategies [Volume 11, Issue 2, 2022, Pages 155-164]
Food waste
Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]
Food Waste Hierarchy
Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]
Forecast Error
Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]
Forward-reverse supply chain
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
Fractional Order
A numerical solution for the fractional ideal equation of thermoelectric coolers [Volume 11, Issue 3, 2022, Pages 258-272]
Frequent pattern
Data mining and diagnosis of heart diseases: a hybrid approach to the b-mine algorithm and association rules [Volume 11, Issue 1, 2022, Pages 77-91]
Frozen food
An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]
FTOPSIS
A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]
Full factorial DOE analysis
Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]
Fuzzified Decision-making computations
Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]
Fuzzy
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Fuzzy
Development a forward-reverse network optimization model with delay reduction and multistage fuzzy demand satisfaction policy [Volume 12, Issue 4, 2023, Pages 375-387]
Fuzzy-AHP
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Fuzzy Analytic Hierarchy Process
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
Fuzzy axiomatic design
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Fuzzy Best-Worst
A Fuzzy BWM Approach to Prioritize Distribution Network Enablers [Volume 11, Issue 4, 2022, Pages 349-365]
Fuzzy control charts
Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]
Fuzzy failure modes
Failure Modes and Effects Analysis under Fuzzy Environment Using Fuzzy Axiomatic Design Approach [Volume 6, Issue 1, 2017, Pages 51-68]
Fuzzy FMEA
Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]
Fuzzy hierarchical analysis
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Fuzzy Inference Systems
Analysis of the LARG of the Hospital Medical Equipment Supply Chain using the Fuzzy Inference System [(Articles in Press)]
Fuzzy linear programming
Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]
Fuzzy logic
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Fuzzy logic
Analysis of the LARG of the Hospital Medical Equipment Supply Chain using the Fuzzy Inference System [(Articles in Press)]
Fuzzy mathematical programming
A Novel Approach for Solving Fuzzy Multi-Objective Zero-One Linear Programming Problems [Volume 1, Issue 1, 2012, Pages 42-63]
Fuzzy mathematical programming
A MOLFP Method for Solving Linear Fractional Programming Under Fuzzy Environment [Volume 6, Issue 3, 2017, Pages 202-213]
Fuzzy Numbers
On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]
Fuzzy Numbers
A new method for solving fuzzy linear fractional programming problem with new ranking function [Volume 8, Issue 4, 2019, Pages 384-393]
Fuzzy open shop scheduling problem
A Novel Discrete Electromagnetism-Like for Fuzzy Open Shop Scheduling Problem with Parallel Machines to Minimize Makespan [Volume 1, Issue 3, 2012, Pages 1-25]
Fuzzy payoff
On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]
Fuzzy System
Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]
Fuzzy theory
Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]
Fuzzy TOPSIS
Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]
Fuzzy TOPSIS
Improvement of the student-teacher learning interface with selecting and designing a teaching method [Volume 9, Issue 3, 2020, Pages 247-259]
Fuzzy uncertainty
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
GAHP
The Optimization Model for Allocating Reward to Employees using GAHP and Cluster Analysis [(Articles in Press)]
GAMS
Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]
Gap Analysis
Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]
Gap Analysis
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
Gardiner
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
Garments
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Gas Transmission Facility
Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]
GCD-Graph
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
Generalized PCI
A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]
Genetic algorithm
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Genetic algorithm
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Genetic algorithm
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Genetic algorithm
A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]
Genetic algorithm
A Novel Genetic Algorithm Based Method for Building Accurate and Comprehensible Churn Prediction Models [Volume 2, Issue 4, 2013, Pages 1-14]
Genetic algorithm
Robust Design of Maintenance Scheduling Considering Engineering Insurance Using Genetic Algorithm [Volume 3, Issue 1, 2014, Pages 39-48]
Genetic Algorithm
An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]
Genetic Algorithm
A Genetic Algorithm for Curve Fitting by Spline Regression [Volume 11, Issue 4, 2022, Pages 399-410]
Genetic Algorithm
A mathematical model for robust landing and take-off scheduling at an airport considering runway disturbances [Volume 12, Issue 1, 2023, Pages 21-42]
Genetic Algorithm
A vibration damping optimization algorithm to solve flexible job shop scheduling problems with reverse flows [Volume 12, Issue 4, 2023, Pages 431-449]
Genetic Algorithm
A new efficient genetic algorithm-Taguchi-based approach for multi-period inventory routing problem [Volume 12, Issue 4, 2023, Pages 397-413]
Genetic algorithm (GA)
Production Scheduling of Parallel Identical Lines in a Multi-Product Manufacturing System with Genetic Algorithm [Volume 12, Issue 1, 2023, Pages 7-20]
Geographical information system
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
Global Criteria Method
A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]
GMAW welding
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Goal Programming
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
Goal Programming
Productivity Improvement through Ergonomics Sub-system Concern Using MCDM with Goal Programing: A Case Study [Volume 11, Issue 4, 2022, Pages 378-389]
Goodness of generalized PCI
A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]
Greedy Algorithm
Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]
Greenhouse gas emission
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Green Internet of things (G-IoT)
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
Green manufacturing
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Green supply chain
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
Green supply chain
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
Green supply chain
Designing a hybrid model for the green supply chain in Gilan Steel Industry [Volume 12, Issue 1, 2023, Pages 73-87]
Green supply chain
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Green Supply Chain Management
An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]
Green Supply Chain Management
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Grey interval number
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
GREY TOPSIS
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
Grey VIKOR
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
Grounded theory
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
GSCM
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
H
Haar cascade classifier
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
Haar cascade classifier
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Hamilton cycle
Difference divisor graph of the finite group [Volume 7, Issue 2, 2018, Pages 235-242]
Hardness
Study on the effect of different types of crude oils on the rate of corrosion and the properties of some selected ferrous metals [Volume 8, Issue 1, 2019, Pages 66-76]
Harmonization of engineering disciplines
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Health care
Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]
Healthcare
A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]
Healthcare centres
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Healthcare Systems
ChatGPT for healthcare sector: SWOT analysis [Volume 12, Issue 3, 2023, Pages 221-233]
Heat Transfer Coefficient
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
Heavy metal
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
HOQ
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Horizontal
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Hospital
Analysis of the LARG of the Hospital Medical Equipment Supply Chain using the Fuzzy Inference System [(Articles in Press)]
Hospital sector
Evaluation of the efficiency by DEA a case study of hospital [Volume 8, Issue 3, 2019, Pages 283-293]
Human factor
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
Human fatigue
Application of accelerated life testing in human reliability analysis [Volume 10, Issue 4, 2021, Pages 346-357]
Hungarian Algorithm
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
Hybrid method
The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-constraint [Volume 10, Issue 3, 2021, Pages 223-237]
I
Idle Time
Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]
IF-THEN rules
Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]
Imperialistic competitive algorithm
A mathematical model for robust landing and take-off scheduling at an airport considering runway disturbances [Volume 12, Issue 1, 2023, Pages 21-42]
Industrial chemistry
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Industrial engineering
Industrial engineering is a mindset, not a methodology [Volume 11, Issue 3, 2022, Pages 322-326]
Industrial engineering
New Course in Industrial Engineering Education Curriculum [Volume 12, Issue 1, 2023, Pages 1-6]
Industrial revolutions
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Industry 4.0
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Industry– ready graduates
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Information system model
Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]
Information system model
Supply chain management information system model for quality assurance in educational management for ASEAN University network quality assurance (AUN-QA) [Volume 10, Issue 4, 2021, Pages 307-317]
Innovation
The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]
Integer programming
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
Integer programming
An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]
Integrated Approach
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Integration model
A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]
Integration model
Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]
Interdiction
An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]
Intermediate output
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Intermediate product
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
International financial system
Identifying key indicators for developing the use of blockchain technology in financial systems [Volume 11, Issue 3, 2022, Pages 244-257]
Internship Program
Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]
Interpretive structural modeling
Provide a Structural Model of Lean Sustainable Supply Chain With Total Quality Management Approach in the Automotive Industry [(Articles in Press)]
Interval Type-2 Fuzzy AHP
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Interval type-2 fuzzy sets
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]
Inventory control
Improving the performance of planning and controlling raw material inventory in food industry [Volume 10, Issue 4, 2021, Pages 332-345]
Inventory Routing Problem
A new efficient genetic algorithm-Taguchi-based approach for multi-period inventory routing problem [Volume 12, Issue 4, 2023, Pages 397-413]
Investment Opportunity
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
IoT
Cloud-based IoT: integration cloud computing with internet of things [Volume 7, Issue 4, 2018, Pages 482-494]
IPA
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Iranian Automotive Industry
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Iran Industry
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
ISM
Designing a hybrid model for the green supply chain in Gilan Steel Industry [Volume 12, Issue 1, 2023, Pages 73-87]
J
Job Rotation
Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]
Jump diffusion model
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Jupyter
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
K
Kaizen
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Kano
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Key Words: Business Success
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Keywords: Six Sigma
Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]
Keywords: TPM
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]
Kinetic Energy Wastage
Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]
K-Nearest Neighbors
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Knowledge transfer
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Kolmogorov-Smirnov Test
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
Kurtosis
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
L
Lagging Indicators
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Lagos
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
Lagrangian Relaxation
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Lagrangian Relaxation
Blood supply chain network design considering responsiveness and reliability in conditions of uncertainty using the lagrangian relaxation algorithm [Volume 11, Issue 2, 2022, Pages 188-204]
Landfill
Measuring effective indicators for waste disposal in order to assess the sustainable environment: application of fuzzy approach [Volume 12, Issue 3, 2023, Pages 287-305]
LARG Supply Chain
Analysis of the LARG of the Hospital Medical Equipment Supply Chain using the Fuzzy Inference System [(Articles in Press)]
Leader-Follower Game
Modeling of the supply chain of cooperative game between two tiers of retailer and manufacturer under conditions of uncertainty [Volume 10, Issue 2, 2021, Pages 95-116]
Leading Indicators
Developing Composite Leading Indicators to Forecast Industrial Business Cycles in Iran [Volume 6, Issue 1, 2017, Pages 69-89]
Lean
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Lean Approach
Provide a Structural Model of Lean Sustainable Supply Chain With Total Quality Management Approach in the Automotive Industry [(Articles in Press)]
Lean manufacturing
Analyzing the Impact of 5S implementation in the manufacturing department: a case study [Volume 10, Issue 4, 2021, Pages 286-294]
Lean manufacturing
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method [Volume 13, Issue 1, 2024, Pages 25-47]
Lean Maturity Assessment Model
Development of a lean maturity assessment model using interval-valued spherical fuzzy AHP method [Volume 13, Issue 1, 2024, Pages 25-47]
Lean principles
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Lean Tools
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Learning factory
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Least common multiple
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Least square error
A Genetic Algorithm for Curve Fitting by Spline Regression [Volume 11, Issue 4, 2022, Pages 399-410]
Level of Service
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
Linear Programming
Scheduling Project Crashing Time Using Linear Programming Approach: Case Study [Volume 6, Issue 4, 2017, Pages 283-292]
Linear Programming
Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]
Linear Programming
Solving semi-fully fuzzy linear programming problems [Volume 10, Issue 3, 2021, Pages 251-275]
Linear programming problem
A MOLFP Method for Solving Linear Fractional Programming Under Fuzzy Environment [Volume 6, Issue 3, 2017, Pages 202-213]
Linear programming problem
Modified Method for Solving Fully Fuzzy Linear Programming Problem with Triangular Fuzzy Numbers [Volume 6, Issue 4, 2017, Pages 293-311]
Line balancing techniques
Application of line balancing heuristics for achieving an effective layout: a case study. [Volume 9, Issue 2, 2020, Pages 114-129]
Linguistic Variables
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]
Literature Review
Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]
Location
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
Lunch break
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
LW-type cyclic mapping
Some fixed point results involving a general LW-type cyclic mapping in complete b-metric-like spaces [Volume 8, Issue 3, 2019, Pages 262-273]
LW-Type Lipschitz Cyclic Mapping (LTLCM)
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
M
Machine Learning
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
Machine Learning
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Machine Learning
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Machine Learning
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Machine Learning
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Machine Learning
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Magneticfield
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
Make to Order (MTO)
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Make to Stock (MTS)
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Manpower
Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]
Manufacturing Line
Productivity optimization in the electronics Industry Using Simulation-based Modeling Approach [(Articles in Press)]
Manufacturing resources
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Manufacturing system
Cloud manufacturing: from a concept to a way for being lean [Volume 7, Issue 2, 2018, Pages 206-223]
Marcucci approach
Implementation of fuzzy rule-based algorithms in p control chart to improve the performance of statistical process control [Volume 7, Issue 4, 2018, Pages 441-459]
Marketing
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
Market Orientation
Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]
Mathematical Modeling
Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]
Mathematical Modeling
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
MATLAB software
Excessive sound noise risk assessment in textile mills of an Ethiopian-Kombolcha textile industry share company [Volume 8, Issue 2, 2019, Pages 105-114]
Matrix games
On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]
Maufacturing
Application of accelerated life testing in human reliability analysis [Volume 10, Issue 4, 2021, Pages 346-357]
MCDM
Productivity Improvement through Ergonomics Sub-system Concern Using MCDM with Goal Programing: A Case Study [Volume 11, Issue 4, 2022, Pages 378-389]
Mean test
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
Measurement error
Designing the multivariate nonconforming proportion control charts considering the measurement error [Volume 10, Issue 4, 2021, Pages 295-306]
Medical Equipment
Analysis of the LARG of the Hospital Medical Equipment Supply Chain using the Fuzzy Inference System [(Articles in Press)]
Meta-heuristic
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
Metaheuristic
A new efficient genetic algorithm-Taguchi-based approach for multi-period inventory routing problem [Volume 12, Issue 4, 2023, Pages 397-413]
Meta- heuristic algorithm
Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]
Metaheuristic Algorithm
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Metaheuristic Algorithms
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Metaheuristic Algorithms
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Metaheuristics
Modeling and Scheduling University Course Timetabling Problems [Volume 5, 1(4), 2016, Pages 1-15]
Meta-heuristics algorithm
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Meta-Synthesis
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Meta-Synthesis
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Microsilica
Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]
MILP
Stuff scheduling in capillary marketing and analyse of its impact on the company’s financial issues [Volume 8, Issue 1, 2019, Pages 53-65]
Mindset
Industrial engineering is a mindset, not a methodology [Volume 11, Issue 3, 2022, Pages 322-326]
Minimization optimization model
Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]
Mismatch
Ergonomic furniture design for secondary girls school in Bangladesh [Volume 8, Issue 2, 2019, Pages 187-202]
Missing Judgments
Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]
Mixed-integer linear programming (MILP)
Production Scheduling of Parallel Identical Lines in a Multi-Product Manufacturing System with Genetic Algorithm [Volume 12, Issue 1, 2023, Pages 7-20]
MODAPTS
Estimating Duration of Projects Manual Tasks Using MODAPTS plus Method [Volume 2, Issue 1, 2013, Pages 12-19]
Model development
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Modeling
Productivity optimization in the electronics Industry Using Simulation-based Modeling Approach [(Articles in Press)]
Monte Carlo Method
A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]
Most Productive Scale Size
Data Envelopment Analysis Based on MPSS Efficient and Inefficient Frontiers [Volume 2, Issue 4, 2013, Pages 15-25]
Most Productive Scale Size
A new model to measuring efficiency and returns to scale on data envelopment analysis [Volume 10, Issue 2, 2021, Pages 128-137]
Movie Recommendation
Movie recommendation system using machine learning [Volume 9, Issue 1, 2020, Pages 84-98]
MRI
How metaheuristic algorithms can help in feature selection for Alzheimer’s diagnosis [Volume 12, Issue 2, 2023, Pages 197-204]
Multi attribute decision mmaking
Measuring effective indicators for waste disposal in order to assess the sustainable environment: application of fuzzy approach [Volume 12, Issue 3, 2023, Pages 287-305]
Multi-criteria decision making
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Multi-criteria decision making
Facility location selection for plastic manufacturing industry in Bangladesh by using AHP method [Volume 7, Issue 3, 2018, Pages 307-319]
Multi-criteria decision making
Fuzzified synthetic extent weighted average for appraisal of design concepts [Volume 9, Issue 2, 2020, Pages 183-201]
Multi-Criteria Decision Making Methods
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
Multi-depot
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]
Multi-Label Learning Library
PyIT-MLFS: a Python-based information theoretical multi-label feature selection library [Volume 11, Issue 1, 2022, Pages 9-15]
Multi-objective algorithms
Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]
Multiobjective assignment problem
A signed distance for (γ,δ) interval-valued fuzzy numbers to solve multi objective assignment problems with fuzzy parameters [Volume 11, Issue 2, 2022, Pages 205-213]
Multi-objective decision making problem
A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]
Multi-Objective Optimization
Solving FMS Assignment Problem with Grouping Genetic Algorithm [Volume 1, Issue 3, 2012, Pages 60-68]
Multi-Objective Optimization
Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]
Multi-Objective Optimization
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
Multi-Objective Optimization
Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]
Multi-objective Programming
A Multi-Objective Model for Location-Allocation Problem in a Supply Chain [Volume 4, 1(4), 2015, Pages 24-42]
Multi-objective supplier selection
An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]
Multi-objective transportation problem
A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]
Multi-Period
A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]
Multi-Period Multi-Attribute Group Decision-Making
Development of a multi-period multi-attribute group decision-making method using type- 2 fuzzy set of linguistic variables [Volume 10, Issue 2, 2021, Pages 138-154]
Multiple Attribute Group Decision Making
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Multiple Criteria Decision Making
Decision making in best player selection: An integrated approach with AHP and Extended TOPSIS methods based on WeFA Freamwork in MAGDM problems [Volume 4, 1(4), 2015, Pages 1-14]
Multiple Criteria Decision Making
The utilization of MARCOS method for different engineering applications: a comparative study [Volume 12, Issue 2, 2023, Pages 155-164]
Multiple Layer DEA
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Multiple regression
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Multi-product assembly line
Presentation and implementation multi-objective mathematical models to balance the assembly line [Volume 10, Issue 1, 2021, Pages 56-66]
Multi-product supply chain
A mathematical model of the location problem for central and secondary warehouses in the multi-level supply chain network of perishable products [Volume 13, Issue 1, 2024, Pages 11-24]
Multivariate Control Chart
Designing the multivariate nonconforming proportion control charts considering the measurement error [Volume 10, Issue 4, 2021, Pages 295-306]
Municipal solid waste
Measuring effective indicators for waste disposal in order to assess the sustainable environment: application of fuzzy approach [Volume 12, Issue 3, 2023, Pages 287-305]
Murtala Muhammed international airport (MMIA)
Customers' satisfaction with the level of service in Murtala Muhammad International Airport (MMIA), Lagos, Nigeria [Volume 10, Issue 1, 2021, Pages 35-45]
N
Nanofluids
Thermodynamic analysis of hybrid-nanofluids-zeotropic mixtures in a vapour compression refrigeration system (VCRS) based on exergy principles [Volume 12, Issue 2, 2023, Pages 143-154]
Nanotechnology
Reviewing on Nanotechnology for Creating Antimicrobial for Chicken Feed: Max-Min Optimization Approach [Volume 6, Issue 4, 2017, Pages 312-327]
Nash bargaining game model
A New Bargaining Game Model for Measuring Performance of Two-Stage Network Structures [Volume 1, Issue 2, 2012, Pages 27-39]
Neka power plant
Evaluating the Implementation of Strategies in Plants Using Balanced Scorecard (BSC): A Case Study [Volume 6, Issue 1, 2017, Pages 39-50]
Network Data Envelopment Analysis
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
Network Data Envelopment Analysis
Technical analysis of petrochemical industries of Iran using a network data envelopment analysis model [Volume 12, Issue 4, 2023, Pages 337-363]
Network DEA
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
Non-Destructive Testing (NDT)
Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]
Nonlinear analysis
Fixed point theorems of LW-type Lipschitz cyclic mappings in complete B-metric-like spaces [Volume 7, Issue 2, 2018, Pages 136-146]
Nonlinear equations
A Barzilai Borwein Adaptive Trust-Region Method for Solving Systems of Nonlinear Equation [Volume 6, Issue 4, 2017, Pages 339-349]
Non-linear Programming
Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]
Non-trivial divisor
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Non-unit elements
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
NPP Accident
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
NumPy
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
NumPy
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
NumPy
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Nurse scheduling
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
O
Office chair
Office chair design: a systematic approach of ergonomic design based on the anthropometric measurement of Bangladeshi people [Volume 7, Issue 2, 2018, Pages 224-234]
One-way ANOVA
Evaluation of household expenditure in the united states: pre-covid and post-covid statistical analysis [Volume 12, Issue 4, 2023, Pages 388-396]
OpenAI trial version
ChatGPT for healthcare sector: SWOT analysis [Volume 12, Issue 3, 2023, Pages 221-233]
OpenCV
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
OpenCV
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
OpenCV
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
OpenCV
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Open Innovation
Customer Involvement in Innovation Process Based on Open Innovation Concepts [Volume 1, Issue 2, 2012, Pages 1-9]
OpenIoT
Cloud-based IoT: integration cloud computing with internet of things [Volume 7, Issue 4, 2018, Pages 482-494]
Open Vehicle Routing
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]
Operating Cash Flow
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Operating room
A mathematical model for integrated operating room and surgical member scheduling considering lunch break [Volume 9, Issue 4, 2020, Pages 304-312]
Operational Performance
Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]
Operations Sequence
Production Scheduling of Parallel Identical Lines in a Multi-Product Manufacturing System with Genetic Algorithm [Volume 12, Issue 1, 2023, Pages 7-20]
Optimal control
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
Optimal flowing approach
A signed distance for (γ,δ) interval-valued fuzzy numbers to solve multi objective assignment problems with fuzzy parameters [Volume 11, Issue 2, 2022, Pages 205-213]
Optimal flowing method
A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]
Optimal fuzzy assignment
A signed distance for (γ,δ) interval-valued fuzzy numbers to solve multi objective assignment problems with fuzzy parameters [Volume 11, Issue 2, 2022, Pages 205-213]
Optimal fuzzy strategy
On solving two-person zero-sum fuzzy matrix games via linear programming approach [Volume 8, Issue 1, 2019, Pages 17-27]
Optimal order allocation
An integrated multi-objective mathematical model to select suppliers in green supply chains [Volume 9, Issue 3, 2020, Pages 216-234]
Optimal reactive power
Factual power loss reduction by augmented monkey optimization algorithm [Volume 9, Issue 1, 2020, Pages 1-12]
Optimal reactive power
Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]
Optimal reactive power
Real power loss reduction by Acridoidea stirred artificial bee colony algorithm [Volume 9, Issue 3, 2020, Pages 209-215]
Optimal Sequence
An empirical analysis of exact algorithms for solving non-preemptive flow shop scheduling problem [Volume 11, Issue 3, 2022, Pages 306-321]
Optimal transportation
A signed distance method for solving multi-objective transportation problems in fuzzy environment [Volume 8, Issue 3, 2019, Pages 274-282]
Optimisation protocol
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Optimization of manufacturing
Influence of missmatch-induced stress and porosity of materials on technological process [Volume 11, Issue 2, 2022, Pages 92-118]
Option pricing
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Option pricing model
Comprehensive Method to Determine Real Option Utilizing Probability Distribution [Volume 3, Issue 1, 2014, Pages 11-25]
Order picking problem
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Ordinal logistic regression
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Ordinal responses
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Organizational performance management
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Organizational performance measurement
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Organizational Resilience
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Organization performance
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
OTP
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
Outsourcing
An Interdiction Median Model for Hierarchical Capacitated Facilities [Volume 3, Issue 1, 2014, Pages 1-10]
Overall Equipment Effectiveness
Improvement of overall equipment efficiency with root cause analysis and TPM strategy: a case study [Volume 12, Issue 3, 2023, Pages 205-220]
Overall Productivity Assessment
Overall productivity assessment using the performance objectives productivity (po-p) approach: a case study [Volume 11, Issue 3, 2022, Pages 214-223]
P
Packaging standards
Assessing the awareness of local consumer’s product producers towards packaging standards in Tanzania [Volume 8, Issue 1, 2019, Pages 40-52]
Parallel Lines Production Scheduling
Production Scheduling of Parallel Identical Lines in a Multi-Product Manufacturing System with Genetic Algorithm [Volume 12, Issue 1, 2023, Pages 7-20]
Pareto Chart
Development of a maintenance schedule plan to improve the equipment efficiency of an industry: a case study [Volume 8, Issue 2, 2019, Pages 140-157]
Pareto Frontier
The study of multi-objective supplier selection problem by a novel hybrid method: COA/ε-constraint [Volume 10, Issue 3, 2021, Pages 223-237]
Partial slip
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
Particle swarm optimisation
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Passengers’ satisfaction
Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]
Passengers’ Traffic
The impact of passenger's traffic on exchange rate and economic growth in Nigerian aviation industry [Volume 9, Issue 4, 2020, Pages 364-378]
PDCA
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Performance Assessment
Developing 360 degree performance evaluation method for school teachers [Volume 8, Issue 1, 2019, Pages 28-39]
Performance Evaluation
Efficiency Evaluation and Ranking of the Research Center at the Ministry of Energy: A Data Envelopment Analysis Approach [Volume 1, Issue 1, 2012, Pages 10-18]
Performance Evaluation
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Performance Evaluation
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Performance Evaluation
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Performance Evaluation
Technical analysis of petrochemical industries of Iran using a network data envelopment analysis model [Volume 12, Issue 4, 2023, Pages 337-363]
Performance Management
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Performance measurement
Development of the field of organizational performance during the industry 4.0 period [Volume 11, Issue 2, 2022, Pages 134-154]
Performance Prediction
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Peristaltic flow
Influence of Wall Properties on the Peristaltic Flow of a Jeffrey Fluid in a Uniform Porous Channel under Heat Transfer [Volume 6, Issue 3, 2017, Pages 246-261]
Permanent Magnet
Optimal Design of PM Synchronous Generator for Aerial Industries Power Supply Using Cuckoo Algorithm [Volume 3, Issue 3, 2014, Pages 49-68]
Personal Characteristics
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Pharmaceutical Company
Optimization of a green supply chain network: a case study in a pharmaceutical industry [Volume 10, Issue 3, 2021, Pages 174-186]
Pharmaceutical industry
Ranking of companies in generating operating cash flows based on data envelopment analysis [Volume 12, Issue 4, 2023, Pages 364-374]
Pickup and Delivery
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
PM
A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]
PM
Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]
Poisson Process
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Poisson Process
A note on the generalized indices of process capability [Volume 9, Issue 3, 2020, Pages 286-303]
PO-P approach
Overall productivity assessment using the performance objectives productivity (po-p) approach: a case study [Volume 11, Issue 3, 2022, Pages 214-223]
Potential Energy Wastage
Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]
Potential Subsystems
Overall productivity assessment using the performance objectives productivity (po-p) approach: a case study [Volume 11, Issue 3, 2022, Pages 214-223]
Power Generation
Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]
Power output and Power Coefficient
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Predictive Maintenance
Robust Design of Maintenance Scheduling Considering Engineering Insurance Using Genetic Algorithm [Volume 3, Issue 1, 2014, Pages 39-48]
Preference degree
Improving classic hungarian algorithm considering uncertainty by applying for grey numbers [Volume 12, Issue 3, 2023, Pages 321-336]
Pre-post covid analysis
Evaluation of household expenditure in the united states: pre-covid and post-covid statistical analysis [Volume 12, Issue 4, 2023, Pages 388-396]
Primary School
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Principal ideal
Number theoretic properties of the commutative ring Zn [Volume 8, Issue 1, 2019, Pages 77-88]
Problem-solving
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
Process mining
Applying the Process Mining Project Methodology for Insurance Risks Reduction [Volume 3, Issue 4, 2014, Pages 57-69]
Process Mining Project Methodology
Applying the Process Mining Project Methodology for Insurance Risks Reduction [Volume 3, Issue 4, 2014, Pages 57-69]
Process quality
A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]
Process quality
Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]
Produced Water
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
Product
Assessing the awareness of local consumer’s product producers towards packaging standards in Tanzania [Volume 8, Issue 1, 2019, Pages 40-52]
Product Arrangement
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Production Planning
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Production Planning
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Production scheduling
A New Approach in Joint Optimization of Maintenance Planning, Process Quality and Production Scheduling [Volume 3, Issue 2, 2014, Pages 24-32]
Production scheduling
Ranking Decision Making Units with Negative and Positive Input and Output [Volume 3, Issue 3, 2014, Pages 69-74]
Production System
An optimization model for aggregate production planning and control: a genetic algorithm approach [Volume 8, Issue 3, 2019, Pages 203-224]
Productivity
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Productivity
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
Productivity
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Productivity index
Overall productivity assessment using the performance objectives productivity (po-p) approach: a case study [Volume 11, Issue 3, 2022, Pages 214-223]
Product prioritization
A Fuzzy-AHP Method for Selection Best Apparel Item to Start-Up with New Garment Factory: A Case Study in Bangladesh [Volume 7, Issue 1, 2018, Pages 32-50]
Project management standards
A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]
Project portfolio selection
A Novel Approach for Solving Fuzzy Multi-Objective Zero-One Linear Programming Problems [Volume 1, Issue 1, 2012, Pages 42-63]
Project scheduling
Solving a new multi-objective resource constrained project scheduling problem by SAICA and compare it with DE method [Volume 7, Issue 2, 2018, Pages 147-183]
Project scheduling
Presentation a Multi-objective Optimization Model for Resource-Constrained Project Scheduling Regarding Financial Costs, Time Delays and the Reliability Function [(Articles in Press)]
Project selection
Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]
PROMETHEE method
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
PyCharm
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
PyCharm
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Python
Modified Haar-cascade model for face detection issues [Volume 9, Issue 2, 2020, Pages 143-171]
Python
Detection of pedestrian and different types of vehicles using image processing [Volume 9, Issue 2, 2020, Pages 99-113]
Python
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
Python
Content based movie recommendation system [Volume 9, Issue 4, 2020, Pages 337-348]
Python
Frontal and non-frontal face detection using deep neural networks (DNN) [Volume 10, Issue 1, 2021, Pages 9-21]
Q
QFD
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
QR menu
A short communication article on contactless menu [Volume 9, Issue 4, 2020, Pages 313-317]
Quadratic assignment problem
A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]
Quality
Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]
Quality Assurance
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
Quality assurance in educational management
Supply chain management information system model for quality assurance in educational management for ASEAN University network quality assurance (AUN-QA) [Volume 10, Issue 4, 2021, Pages 307-317]
Quality Control
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Quality Control
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Quality Function Deployment
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Quality Function Deployment
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Quality Service
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Quantitative responses
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Queener
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
R
Random Fuzzy Data Envelopment Analysis
The survey of data envelopment analysis models in fuzzy stochastic environments [Volume 8, Issue 4, 2019, Pages 366-383]
Ranking
Fuzzy Big-M Method for Solving Fuzzy Linear Programs with Trapezoidal Fuzzy Numbers [Volume 2, Issue 3, 2013, Pages 1-9]
Ranking
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Ranking
Investment projects ranking with DEA method considering feasibility study results [Volume 7, Issue 3, 2018, Pages 320-335]
Ranking
Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]
Ranking
A neutral DEA model for cross-efficiency evaluation [Volume 11, Issue 4, 2022, Pages 411-422]
Ranking method
A New Method to Organizational Ranking: Integrating BSC and DEA [Volume 1, Issue 3, 2012, Pages 39-47]
Ranking models
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
Ranking operating rooms
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Ranking Technique
The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]
Rank reversal phenomenon
The utilization of MARCOS method for different engineering applications: a comparative study [Volume 12, Issue 2, 2023, Pages 155-164]
RATING
Movie recommendation system using machine learning [Volume 9, Issue 1, 2020, Pages 84-98]
RCA
Improvement of overall equipment efficiency with root cause analysis and TPM strategy: a case study [Volume 12, Issue 3, 2023, Pages 205-220]
RCA+
Identifying Buyer-Supplier Conflict in Collaborative Process New Product Development [Volume 3, Issue 2, 2014, Pages 12-23]
Reallocation
Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]
Recommender systems
Classification and Comparison of the Hybrid Collaborative Filtering Systems [Volume 6, Issue 2, 2017, Pages 129-148]
Recycled grain
Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]
Redundancy allocation problem
A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]
REGIME
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
Reinforcement Learning
The joint policy of production, maintenance, and product quality in a multi-machine production system by reinforcement learning and agent-based modeling [Volume 13, Issue 1, 2024, Pages 71-87]
Relationship
Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]
Relationship-oriented marketing
How Implementation of E-CRM May Enhance an Organization’s Internal and External Success [Volume 1, Issue 2, 2012, Pages 58-71]
Reliability
A Hybrid Genetic Algorithm/Simulation Approach for Redundancy Optimization with Objective of Maximizing Mean Lifetime and Considering Component Selection [Volume 2, Issue 2, 2013, Pages 35-46]
Reliability
Modeling the Quality and Reliability Dependent Customer Satisfaction in Healthcare [Volume 3, Issue 2, 2014, Pages 33-45]
Reliability
Presentation a Multi-objective Optimization Model for Resource-Constrained Project Scheduling Regarding Financial Costs, Time Delays and the Reliability Function [(Articles in Press)]
Reliability Block Diagram (RBD)
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
Reliablility
Blood supply chain network design considering responsiveness and reliability in conditions of uncertainty using the lagrangian relaxation algorithm [Volume 11, Issue 2, 2022, Pages 188-204]
Relief centers
Assessing the location of relief centers using a combination of multi-criteria decision-making methods and gis (case study: district 18 of tehran) [Volume 11, Issue 1, 2022, Pages 16-29]
Relief Logistics
Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]
Renewable Energy
Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]
Renewable Energy
Optimum solar and wind model with particle optimization (PSO) [Volume 7, Issue 4, 2018, Pages 460-467]
Renewable Energy
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Resilience
Identifying effective factors of organizational resilience: a meta-synthesis study [Volume 12, Issue 2, 2023, Pages 177-196]
Resource constrained project scheduling
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Resource tardiness penalty costs
Minimizing Total Resource Tardiness Penalty Costs in the Resource Constrained Project Scheduling Problem with Metaheuristic Algorithms [Volume 2, Issue 3, 2013, Pages 47-57]
Responsiveness policies
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
Reverse flow
A vibration damping optimization algorithm to solve flexible job shop scheduling problems with reverse flows [Volume 12, Issue 4, 2023, Pages 431-449]
Reward
The Optimization Model for Allocating Reward to Employees using GAHP and Cluster Analysis [(Articles in Press)]
RFM
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
RFM model
Customer segmentation to identify key customers based on RFM model by using data mining techniques [Volume 11, Issue 1, 2022, Pages 62-76]
Rice Husk Ash
Proposing the use of fine stone cutting factory as recycled materials in concrete and study of design economy and environmental protection [Volume 9, Issue 3, 2020, Pages 271-285]
Risk Assessment
Application of fuzzy AHP and TOPSIS methods for risk evaluation of gas transmission facility [Volume 8, Issue 4, 2019, Pages 339-365]
Risk-neutral measure
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Risk priority number
Assessment of fuzzy failure mode and effect analysis (FMEA) for reach stacker crane (RST): A case study [Volume 7, Issue 3, 2018, Pages 336-348]
RMG
Evaluation of Factors Affecting the Productivity of RMG in Bangladesh: A Fuzzy AHP Approach [Volume 7, Issue 1, 2018, Pages 51-60]
RSM
Formulation of a customer-oriented product and determination of optimum design parameters using response surface methodology [Volume 9, Issue 4, 2020, Pages 349-363]
RSM
Fabrication and process parameter optimization of a 3d printer using response surface methodology [Volume 10, Issue 3, 2021, Pages 238-250]
Rural Entrepreneurial Factors
Identifying and ranking the effective financial factors on rural entrepreneurial small businesses [Volume 13, Issue 1, 2024, Pages 1-10]
Rural Small Businesses
Identifying and ranking the effective financial factors on rural entrepreneurial small businesses [Volume 13, Issue 1, 2024, Pages 1-10]
S
Saddle Point
Toward characterizing solutions to complex programming problems involving fuzzy parameters in constraints [Volume 13, Issue 1, 2024, Pages 62-70]
SBM
Classifications of linking activities based on their inefficiencies in Network DEA [Volume 12, Issue 2, 2023, Pages 165-176]
Scheduling system
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Score function
Modified solution for neutrosophic linear programming problems with mixed constraints [Volume 9, Issue 1, 2020, Pages 13-24]
Secondary warehouses
A mathematical model of the location problem for central and secondary warehouses in the multi-level supply chain network of perishable products [Volume 13, Issue 1, 2024, Pages 11-24]
Sensitivity analysis
Organizational Performance Evaluation Considering Human Capital Management Approach by Fuzzy-DEA: A Case Study [Volume 6, Issue 1, 2017, Pages 1-16]
Sensitivity analysis
Data envelopment analysis for estimate efficiency and ranking operating rooms: a case study [Volume 10, Issue 1, 2021, Pages 67-86]
Sequence Dependent Setup Times
Multi-objective sequence dependent setup times hybrid flowshop scheduling: A literature review [Volume 7, Issue 3, 2018, Pages 254-306]
Service Quality
Relationship between passengers’ satisfaction and service quality in murtala muhammed international airport, Lagos, Nigeria [Volume 7, Issue 3, 2018, Pages 349-369]
Servqual
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Sewing
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Sewing Thread and Yarn Manufacturing
Overall productivity assessment using the performance objectives productivity (po-p) approach: a case study [Volume 11, Issue 3, 2022, Pages 214-223]
Sewing Thread and Yarn Manufacturing
Productivity Improvement through Ergonomics Sub-system Concern Using MCDM with Goal Programing: A Case Study [Volume 11, Issue 4, 2022, Pages 378-389]
Shadow Boarding Foam
Analyzing the Impact of 5S implementation in the manufacturing department: a case study [Volume 10, Issue 4, 2021, Pages 286-294]
Shannon Entropy
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Shannon Entropy
An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]
Shape-changeable furniture design
Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]
Siamese Neural Network
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
Signed distance ranking
A signed distance for (γ,δ) interval-valued fuzzy numbers to solve multi objective assignment problems with fuzzy parameters [Volume 11, Issue 2, 2022, Pages 205-213]
Simulated Annealing
Open Vehicle Routing Problem Optimization under Realistic Assumptions [Volume 3, Issue 2, 2014, Pages 46-55]
Simulated Annealing
A simulated annealing optimization algorithm for equal and un-equal area construction site layout problem [Volume 8, Issue 2, 2019, Pages 89-104]
Simulated Annealing
Finding optimum facility’s layout by developed simulated annealing algorithm [Volume 9, Issue 2, 2020, Pages 172-182]
Simulated Annealing Algorithm
A Taghuchi based Multi Objective Time-Cost Constrained Scheduling for Resource Availability Cost Problem: A Case Study [Volume 6, Issue 4, 2017, Pages 269-282]
Simulated Annealing Algorithm
Applying mathematical modeling to create job rotation for improve workforce performance in semi-automatic systems [Volume 9, Issue 4, 2020, Pages 318-327]
Simulation
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
Simulation
REDUCING SEWING DEFECTS TO INCREASE PRODUCTIVITY IN APPAREL INDUSTRY OF BANGLADESH BY INTEGRATING LEAN METHODOLOGY [(Articles in Press)]
Simulation modeling
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
Six Sigma
Six Sigma Project Selection Using Extent Fuzzy AHP: An Empirical Study [Volume 2, Issue 2, 2013, Pages 47-60]
Six Sigma
Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]
Skewness
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Small and Medium Enterprises (SMEs)
Implementation of Six Sigma DMAIC methodology for increasing the competitiveness of SMEs in Ethiopia [Volume 10, Issue 1, 2021, Pages 1-8]
Smart business
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
Smart Supply Chain
A conceptual framework of green smart IoT-based supply chain management [Volume 10, Issue 1, 2021, Pages 22-34]
Smart Voting System
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
SMEs
Customer Profitability Segmentation for SMEs Case Study: Network Equipment Company [Volume 2, Issue 1, 2013, Pages 30-44]
SMEs
Measurement of service quality and customer satisfaction in the SME industry: literature study [Volume 12, Issue 2, 2023, Pages 129-142]
Smoothing Constant
Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]
Social Interactions
Entrepreneurial team characteristics, social interactions, and the success of information technology start-ups [Volume 11, Issue 3, 2022, Pages 224-243]
Soft constraints
Development of a doctor scheduling system: a constraint satisfaction and penalty minimisation scheduling model [Volume 7, Issue 4, 2018, Pages 396-422]
Speed breaker
Energy wastage on an automobile due to speed breakers: a case study on Woldia town [Volume 9, Issue 2, 2020, Pages 202-208]
Spline regression
A Genetic Algorithm for Curve Fitting by Spline Regression [Volume 11, Issue 4, 2022, Pages 399-410]
Sport venues
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Springback
A numerical investigation on the springback in air v-bending of aluminum 1050 A [Volume 11, Issue 2, 2022, Pages 119-133]
Stability
Optimal control strategy on the transmission dynamics of human papillomavirus (HPV) and human immunodeficiency viruses (HIV) coinfection [Volume 10, Issue 4, 2021, Pages 318-331]
Stackelberg game
Modeling of the supply chain of cooperative game between two tiers of retailer and manufacturer under conditions of uncertainty [Volume 10, Issue 2, 2021, Pages 95-116]
Stagnation point
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
Standards evaluation
A Method for Evaluating Project Management Standards, Based on EFQM Criteria, Using FTOPSIS Method [Volume 3, Issue 3, 2014, Pages 1-12]
Statistical process control
A New Estimator Based on Likelihood Function for Drift Time of Change in Poisson Rate Parameter [Volume 3, Issue 1, 2014, Pages 26-38]
Stochastic
Modelling and optimization of residential electricity load under stochastic demand [Volume 13, Issue 1, 2024, Pages 48-61]
Stochastic programming
A Robust Stochastic Programming Approach for Blood Collection and Distribution Network Design [Volume 3, Issue 2, 2014, Pages 1-11]
Stochastic programming
Blood supply chain network design considering responsiveness and reliability in conditions of uncertainty using the lagrangian relaxation algorithm [Volume 11, Issue 2, 2022, Pages 188-204]
Stress Concentration Factor
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
Stress-strength model
[0,1] Truncated Fréchet-Weibull and Fréchet Distributions [Volume 7, Issue 1, 2018, Pages 106-135]
Students
Greedy algorithm for solving student allocation problem in internship program: a case study [Volume 10, Issue 2, 2021, Pages 155-164]
Suggested Performance Value
Productivity Improvement through Ergonomics Sub-system Concern Using MCDM with Goal Programing: A Case Study [Volume 11, Issue 4, 2022, Pages 378-389]
Super Efficiency
The Methods of Ranking based Super Efficiency [Volume 5, 1(4), 2016, Pages 43-66]
Supplier selection
A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]
Supply chain
Designing a Genetic Algorithm to Optimize Fulfilled Orders in Order Picking Planning Problem with Probabilistic Demand [Volume 1, Issue 2, 2012, Pages 40-57]
Supply chain
Collaborative Information System for Managing the Supply Chain: Architecture Based on a Multi Agent System [Volume 2, Issue 2, 2013, Pages 1-16]
Supply chain
Presenting a New Approach toward Locating Optimal Decoupling Point in Supply Chains [Volume 3, Issue 1, 2014, Pages 49-54]
Supply chain
A New Method for Solving Fully Fuzzy Multi Objective Supplier Selection Problem [Volume 6, Issue 3, 2017, Pages 214-227]
Supply chain
A framework to evaluate and improve supply chain: FAHP based case study on a supermarket [Volume 7, Issue 4, 2018, Pages 423-440]
Supply chain
Optimizing Supermarket Supply Chain using fuzzy AHP: A Study on Save 'n' Safe in Bangladesh [Volume 8, Issue 3, 2019, Pages 225-242]
Supply chain
Cost minimization of artificial hip bone implantation surgery by adopting additive manufacturing technique and its feasibility assessment [Volume 9, Issue 4, 2020, Pages 328-336]
Supply chain
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Supply chain
A new model for balancing between asset sharing risk and responsiveness: developing the augmented ɛ-constraint method [Volume 12, Issue 2, 2023, Pages 106-128]
Supply chain
Provide a Structural Model of Lean Sustainable Supply Chain With Total Quality Management Approach in the Automotive Industry [(Articles in Press)]
Supply chain management
Fuzzy Goal Programming for Linear Facility Location-Allocation in a Supply Chain; The Case of Steel Industry [Volume 6, Issue 2, 2017, Pages 90-105]
Supply chain management
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
Supply chain management
Supply chain management information system model for quality assurance in educational management for ASEAN University network quality assurance (AUN-QA) [Volume 10, Issue 4, 2021, Pages 307-317]
Supply chain network
A Hybridized Lagrangian Genetic Algorithm for Designing an Integrated Supply Chain Network: A Case Study Approach [Volume 2, Issue 1, 2013, Pages 45-62]
Support Vector Machine
Breast cancer detection using machine learning algorithms [Volume 9, Issue 3, 2020, Pages 235-246]
Surface plot
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Sustainability
Performance Prediction of Green Supply Chain Using Bayesian Belief Network: Case Study of a Textile Industry [Volume 11, Issue 4, 2022, Pages 327-348]
Sustainability
The impact of digital transformation on sustainability: a case of the Iranian telecom industry [Volume 12, Issue 3, 2023, Pages 306-320]
Sustainability
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
Sustainable environment
Measuring effective indicators for waste disposal in order to assess the sustainable environment: application of fuzzy approach [Volume 12, Issue 3, 2023, Pages 287-305]
SWARA Technique
Evaluating of effective factors on green supply chain management using statistical methods and SWARA approach [Volume 11, Issue 2, 2022, Pages 165-187]
Swarm Optimizations Algorithm
Integrated and periodic relief logistics planning for reaction phase in uncertainty condition and model solving by PSO algorithm [Volume 8, Issue 4, 2019, Pages 294-311]
System Dynamics (SD)
Selecting methodology for developing emergency preparedness and response framework of an NPP accident [Volume 11, Issue 1, 2022, Pages 1-8]
System reliability estimation
A Computer Simulation Model for Reliability Estimation of a Complex System [Volume 7, Issue 1, 2018, Pages 19-31]
T
Tabu Search
A Genetic Algorithm Coupled with Tabu Search for Bi-Objective Permutation Flow Shop [Volume 2, Issue 1, 2013, Pages 20-29]
Taguchi method
Simultaneous optimization of quantitative and ordinal responses using Taguchi method [Volume 7, Issue 2, 2018, Pages 184-205]
Takt Time
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Tariffs
Economical Evaluation of Subsidy Omitting Effect on the Renewable Energy Position in Power Generation in Iran [Volume 2, Issue 2, 2013, Pages 17-34]
Task duration estimation
Estimating Duration of Projects Manual Tasks Using MODAPTS plus Method [Volume 2, Issue 1, 2013, Pages 12-19]
Tchebycheff norm
Ranking efficient DMUs using the Tchebycheff norm with fuzzy data in DEA [Volume 8, Issue 2, 2019, Pages 158-175]
Technical justification
Feasibility Study of Using Renewable Energy in the Management of Sports Venues in the Water and Electricity Industry of East Azerbaijan Province and its Prioritization with D-number Theory [(Articles in Press)]
Technology capability
Identifying and prioritizing technology capability drivers in the supply chain using the fuzzy hierarchical analysis process (Case study: Iran Khodro and Saipa Automotive Company) [Volume 12, Issue 1, 2023, Pages 88-105]
Textile Mill
Excessive sound noise risk assessment in textile mills of an Ethiopian-Kombolcha textile industry share company [Volume 8, Issue 2, 2019, Pages 105-114]
Thai higher education institutions
Information system model for educational management in supply chain for Thai higher education institutions [Volume 10, Issue 2, 2021, Pages 87-94]
Thermal physics
A numerical solution for the fractional ideal equation of thermoelectric coolers [Volume 11, Issue 3, 2022, Pages 258-272]
Three-parameter interval grey numbers
An ERP Selection Combination Model under Uncertainty: A Grey-BSCAHP-Entropy Model [Volume 3, Issue 3, 2014, Pages 13-23]
Threeparameter interval grey numbers
A Novel Genetic Algorithm for a Flow Shop Scheduling Problem with Fuzzy Processing Time [Volume 3, Issue 4, 2014, Pages 1-12]
Tile and ceramic Industry
An Interval Type-2 Fuzzy AHP Approach for Success Factors of Green Supply Chain Management [(Articles in Press)]
Time-Windows
An optimization model for cold chain food distribution [Volume 8, Issue 3, 2019, Pages 243-253]
TOPSIS
A New Method for Ranking Efficient DMUs Based on TOPSIS and Virtual DMUs [Volume 1, Issue 1, 2012, Pages 1-9]
TOPSIS
Application of Fuzzy Hybrid Analytic Network Process in Equipment Selection of Open-Pit Metal Mines [Volume 2, Issue 3, 2013, Pages 35-46]
TOPSIS
Solving a Facility Location Problem by Three Multi-Criteria Decision Making Methods [Volume 3, Issue 4, 2014, Pages 41-56]
TOPSIS
Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]
TOPSIS
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Total Productive Maintenance
Improvement of overall equipment efficiency with root cause analysis and TPM strategy: a case study [Volume 12, Issue 3, 2023, Pages 205-220]
Total Productive Maintenance (TPM)
Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]
Total Quality Management
The Impact of Total Quality Management on Organizational Innovation [Volume 2, Issue 1, 2013, Pages 1-11]
Total Quality Management
Extracting of Relationships Between Modern Management Techniques in SME Manufacturing Support and Procurement of Equipment for Oil Companies of Iran [Volume 6, Issue 2, 2017, Pages 106-120]
Total Quality Management
Total quality management (TQM): Implementation in primary education system of Bangladesh [Volume 7, Issue 3, 2018, Pages 370-380]
TQM
Provide a Structural Model of Lean Sustainable Supply Chain With Total Quality Management Approach in the Automotive Industry [(Articles in Press)]
Transmission Loss
Factual power loss reduction by augmented monkey optimization algorithm [Volume 9, Issue 1, 2020, Pages 1-12]
Transmission Loss
Amplified black hole algorithm for real power loss reduction [Volume 9, Issue 2, 2020, Pages 130-142]
Transmission Loss
Real power loss reduction by Acridoidea stirred artificial bee colony algorithm [Volume 9, Issue 3, 2020, Pages 209-215]
Transportation
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
Transportation
A mathematical model of the location problem for central and secondary warehouses in the multi-level supply chain network of perishable products [Volume 13, Issue 1, 2024, Pages 11-24]
Transportation problem
A Two-Phase Approach for Supply Chain Network Design: A Real-World Case Study from Automotive Industry [Volume 7, Issue 1, 2018, Pages 1-18]
Trend Analysis
Trend extrapolation of domestic air travel demand in Nigeria (2018-2030) [Volume 7, Issue 4, 2018, Pages 468-481]
Trial and error method
Determination of Optimum Smoothing Constant of Single Exponential Smoothing Method: A Case Study [Volume 6, Issue 3, 2017, Pages 184-192]
Two Bin System
The "5S" Strategy by Using PDCA Cycle for Continuous Improvement of the Manufacturing Processes in Agriculture Industry [Volume 2, Issue 3, 2013, Pages 10-23]
Two-level four-factor DOE
Optimal value determination for a shape changeable furniture design parameters using full factorial design of experiment analysis [Volume 10, Issue 2, 2021, Pages 117-127]
Two-stage network structure
Identification and evaluation of congestion in two-stage network data envelopment analysis [Volume 12, Issue 1, 2023, Pages 53-72]
U
Ultimate Tensile Strength
Parametric Optimization (GMAW) for the improvement of Mild Steel weld strength using Response Surface Technique [Volume 11, Issue 4, 2022, Pages 390-398]
Ultrasonic test
Ultrasonic testing for mechanical engineering domain: present and future perspective [Volume 7, Issue 2, 2018, Pages 243-253]
Uncertainty
Identifying and ranking the factors affecting the transportation of products from a marketing perspective using the fuzzy analytic hierarchy process approach [Volume 10, Issue 3, 2021, Pages 187-205]
University canteen
Six Sigma-DMAIC and food waste hierarchy-based framework for reducing food waste in University canteens in Ethiopia [Volume 9, Issue 1, 2020, Pages 77-83]
University course scheduling
Modeling and Scheduling University Course Timetabling Problems [Volume 5, 1(4), 2016, Pages 1-15]
Unsteady nanofluid flow
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
U-shaped assembly line
Multi-objective linear mathematical programming for solving U-shaped robotic assembly line balancing [Volume 8, Issue 1, 2019, Pages 1-16]
V
Value Analysis
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Value-at-Risk
Fuzzy Index Tracking Portfolio Selection Model Based on Value-at-Risk [Volume 2, Issue 4, 2013, Pages 41-57]
Vehicle Routing Location
A two-stage uncertain model to arrange and locate vehicle routing with simultaneous pickup and delivery [Volume 11, Issue 3, 2022, Pages 273-305]
Vending machine
Harmonisation of the engineering disciplines enhanced by the learning factory [Volume 10, Issue 4, 2021, Pages 358-370]
VIKOR
Selecting the optimal industrial investment by multi-criteria decision-making methods with emphasis on, TOPSIS, VIKOR, and COPRAS (case study of Guilan province) [Volume 8, Issue 4, 2019, Pages 312-324]
Visual inspection
Analyzing the Impact of 5S implementation in the manufacturing department: a case study [Volume 10, Issue 4, 2021, Pages 286-294]
Voter Id
Smart voting web based application using face recognition, Aadhar and OTP verification [Volume 9, Issue 3, 2020, Pages 260-270]
W
Wall thickness
Unsteady Magnetohydrodynamic Stagnation Point Flow of a Nanofluid over a Slendering Stretching Sheet Using Buongiorno’s Model [Volume 7, Issue 1, 2018, Pages 84-105]
Waste
An integrated QFD-TOPSIS method for prioritization of major lean tools: a case study [Volume 9, Issue 1, 2020, Pages 65-76]
Waste collection
Solving a Bi-Objective Transportation Vehicle Routing Problem for Waste Collection by a New Hybrid Algorithm [Volume 5, 1(4), 2016, Pages 16-42]
Waste reduction
Application of Circular Economy for Sustainable Waste Management in the Carpet Industry [(Articles in Press)]
Wastewater
Removal of Copper Ions from Liquid Wastes by Adsorption Technique [Volume 6, Issue 3, 2017, Pages 255-268]
Water and air pollution
Analyzing the Drivers of Green Manufacturing Using an Analytic Network Process Method: A Case Study [Volume 7, Issue 1, 2018, Pages 61-83]
Water Treatment
Produced Water Treatment Using a New Designed Electroflotation Cell [Volume 6, Issue 4, 2017, Pages 328-338]
Weight restrictions
Presenting an Analytic Hierarchy Process- Assurance Region- Joint Multiple Layer Data Envelopment Analysis Model for Evaluating the Performance of an Educational System: A Case Study [Volume 3, Issue 4, 2014, Pages 21-40]
Welding defects
Prediction of Stress Concentration Factor in Butt Welding Joints using Artificial Neural Networks [Volume 12, Issue 1, 2023, Pages 43-52]
WHGS3 sesame price
Option pricing on sesame price using jump diffusion models [Volume 9, Issue 1, 2020, Pages 25-45]
Wind Turbine
Design and Development of a Wind Turbine with Flanged Diffuser Operating in Low Wind Speed Regime [Volume 11, Issue 4, 2022, Pages 366-377]
Woldia University
Application of total productive maintenance in service organization [Volume 8, Issue 2, 2019, Pages 176-186]
World-Class
The Role of Integration QFDVA in New Product Design to Achieve World-Class Manufacturing [Volume 6, Issue 1, 2017, Pages 17-38]
Writer Verification
Leveraging deep feature learning for handwriting biometric authentication [Volume 13, Issue 1, 2024, Pages 88-103]
X
XTriz
Identifying Buyer-Supplier Conflict in Collaborative Process New Product Development [Volume 3, Issue 2, 2014, Pages 12-23]
Y
YOLO
Comparative analysis on YOLO object detection with OpenCV [Volume 9, Issue 1, 2020, Pages 46-64]